Mobile LED Operating Light

• Customization: Available
• Type: Operating Light
• Certification: CE, ISO13485
• Model NO.: MCP-MD-01
• Input Power: 120va
• Main Fuse: F3al 250V × 1
• Center Illuminance: 40klx≤ec≤160klx
• Power Supply Frequency: 50Hz
• Beam Depth: ≥700mm
• Maximum Illumination (Ee): ≤1000W/M2
• Transport Package: Standard Package for Export
• Specification: ISO, CE
• Trademark: MeCan Equipment
• Origin: Guangzhou, China
• Production Capacity: 10000 Sets/Year

Product Description

Mobile LED Operating Light



1.Product features

1.  continuous illumination: the lamp head by 48,  88 HighBrightness LED lamp bead, 5, 6 series into a group, known ashigh-brightness light-emitting diodes, with 8 parallel group~16 group formed, MCP-MD-01 -88 LED lamp bead, MCP-MD-01 -1-48LED lamp beads,  . Each group independent of each other, if there are 1 or 2 groups damaged,fails, the rest of the group can continue on.
2. • Lighting (also known as the light engine module), theaverage service life of 30,000 hours.
3. • Streamlined shape, with low air damping coefficient, can be used for the clean operating Department required.
4. • Heat sink design is reasonable, the LED light emitting diode service life, increased use of equipment.
5. • Sterilizable handle to ensure operating control of the lamp in the surgery in a sterile State.
6. • Electrical systems for combination products independentlyand in line with the Fail-save; single fault does not affect the other lamp lamp electrical work.
7. • Configuration and light balance arm suspension system, sixuniversal joint linkage, mobile light, positioning andstability. 360 ° Omni-directional design, the operation inany height and angle.
8. • Lamp with built-in emergency power supply, you can automatically charge, mains power, emergency power supply automatically jump to a working state. Emergency power supply charge indicator light, the light turned green, said it is charging, after sufficient power, led is off.

2.Conditions of use:
  Normal working conditions
  Temperature:10ºC~30ºC;
  Relative humidity:≤70%;
  Atmospheric pressure range:860hPa~1060hPa;

 This equipment can not be worked in flammable and explosive gas environment.
 The type of device security: I type equipment;
  Working system: continuous operation;
  Liquid injection protection level: IPXO.

3.Technical specifications

Electric features
Content		MCP-MD-01			MCP-MD-01 -1
Input Power		120VA			70VA
Main fuse		F3AL 250V × 1
Power supply voltage		AC 220V±10%
Emergency power supply (when optional)		Voltage:DC24V(+5%~-10%),Battery capacity≥12AH
Power supply frequency		50Hz
Performance characteristics
Content				Single Lamp
Center illuminance				40klx≤Ec≤160klx
Spot diameter (D10)				120mm≤d10≤250mm
Spot diameter (D50)				≥d10/2
Beam depth				≥700mm
Shadow-free	In a block when the beam of the bezel the remaining illumination			≥20%
	With two baffle block the beam time remaining illumination			≥30%
	In the standard deep-cavity tube remaining at the bottom of illumination			≥45%
	With one baffle block beam standards while remaining at the bottom of deep cavities tube illumination			≥15%
	Two baffle block beams deep Chambers in the standards while remaining at the bottom of illumination			≥20%
Color temperature				3500K≤Tc≤5000K
Color rendering index				85~100
Maximum illumination (Ee)				≤1000w/m^2
Irradiance Ee Ec and illumination ratio				≤6mW/(m^2lx)
Mechanical characteristics
Balance arm rotate around the rotating arm			≥40°
Brackets around the arm rotation			≥300°
Zonal bracket turns			≥180°
Lamp around the zonal support rotation			≥180°
Balance arm moves up and down			up≥40° down≥40°

4,Shadowless operating instructions on electromagnetic compatibility
3.1,this product according to GB4824 standard group, a product design and testing, electromagnetic compatibility information provided under random file to install and use.
3.2,portable and mobile RF communications equipment can affect the use of this product.
3.3,the basic properties of this product: 40klx ≤ 160klx ≤ Ec Center illumination lighting for operation.
3.4,connect the power cable of this product shall be non-shielded cable area use contained over 0.75mm2.

5,Description of the installation before operation lamp
Operation lamp power requirements AC 220V ± 10%, 50Hz.
Users need to use the safe carrying capacity ≥ 10A outlet for operation lamp power supply.
Warning: the power supply ground wire must be reliable. With a separate safety ground wire, connected with the operation lamp protective earth terminal.