| Customization: | Available |
|---|---|
| Application: | Surgical Equipment |
| Material: | Plastic |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product advantages:
Under the low frequency electric field, a thin layer of plasma about 100 μm thick was formed around the electrode through normal saline. The plasma-thin layer consists of highly ionized particles with sufficient kinetic energy to break the organic molecular bonds of the target tissue and vaporize it. Normal saline was used as washing solution to perform tissue cutting and coagulation, so that the body does not need to follow negative electrode plate, to avoid the occurrence of electrotomy syndrome TURS, and to improve the safety of surgery.
Technology advantages:
1) 40-70ºC low temperature: Compared with ordinary electrosection, low temperature plasma has limited heat penetration, less tissue damage, reduce the possibility of secondary bleeding after operation, small amount of bleeding during operation and fast recovery time;
2) Normal saline as flushing solution: Although the cutting speed of traditional electrosection is faster, the risk of complications such as electrosection syndrome is higher. ECO Cool Plasma Elestrosurgical System uses normal saline as the flushing solution to solve this problem. Because saline is isotonic with the human body's internal environment, it can prevent the large amount of flushing fluid from being absorbed by the human body, resulting in prostatectomy syndrome (water poisoning, low sodium);
3) Bipolar electrode: The energy loop of bipolar electrode is completed between the two poles. It does not need the negative plate and does not pass through the adjacent organs and tissues, so as to provide security for patients and doctors. At the same time, it reduces the risk of obturator nerve reflex and prevents the prostate capsule from being cut through by the electrode.
Applicable department
Urology; Andrology; Anorectology
| Input voltage | 220V |
| input power frequency | 50-60 Hz |
| current | 4A (max) |
| Output frequency | 300KHz |
| The output voltage | ≤450V |
| Tissue cutting ablation temperature | ≤54ºC |
| hemostatic shrinkage temperature | ≤70ºC |
| working condition temperature | -20~50ºC |
| cutting | 1-350W |
| coagulation | 1-150W |
){kind=link}