MED-R-XY-3 Boating Exerciser
This product is used to train the force and stamina of waist and back muscles, flexor muscle groups of upper limbs, extensor muscle groups of lower limbs.
1.2 Executive product standard: enterprise standard
2. Structure and parameters
|The distance between handle and force point on hydro-cylinder||410mm, 460mm, 510mm|
|The distance between center of seat and axis of pedal||700mm~1050mm|
|Height of the back of seat||200mm, 240mm, 280mm, 320mm|
|Force gears of hydro-cylinder||12 gears|
3. Product performance
3.1 Adjust force of hydro-cylinder by gear: the adjustable gears are in line with above parameter table. It is easy to adjust. No oil will leak or seep from the hydro-cylinder.
3.2 The sliding distance of boating pole and seat are in line with the above parameter table. It will be flexible, no retardation.
4. How to use
4.1 The height of back pole can be adjusted according to the size of the trainee and the need of training. Loosen the two screws at both ends of the back pole, take the support and push it down to an appropriate position(refer to parameter table for height), and then fasten the screws.
4.2 The distance between the handle and hydro-cylinder can be adjusted according to the need of training. Take the screws from the boating pole, take out the bolt, choose a hole for the force point of hydro-cylinder according to parameter table, insert the bolt and fasten the screws. The further the distance between handle and force point of hydro-cylinder, the stronger the force.
4.3 Adjust the force of hydro-cylinder: choose from the 12 gears according to the need of training. The bigger the value you choose, the stronger the force.
4.4 The trainee sits of the seat, put his feet on the pedals, fasten the bondages. The two pedals can be moved to left or right slightly.
4.5 Hold the handle, imitate boating. In the exercise, the seat will move forward or backward along with the body of the trainee.
4.6 At the end of training, push the boating pole down.
5. Matters need attention
5.1 Before using this exerciser, please read the user manual carefully to get familiar with the performance, requirement and operation methods of it. Take no-load check on the product to see if it works normally. Only use it when it is proved with normal condition.
5.2 Take serial training with the help of therapist or medical staff. Follow the principle of step by step, increase the intensity and time of training according to the specific condition of the patient.
5.3 You'd better take training slowly, don't pull hard or boat suddenly.